Five-axis reciprocating machine for spraying work mainly has the following steps:

　　Preparation: First of all, you need to connect the spraying equipment with the five-axis reciprocator, and make sure that the equipment and the working condition of the machine is normal. At the same time, prepare the materials or products to be sprayed, and make the relevant spraying paint mixing.

　　Setting parameters: According to the materials or products to be sprayed and the requirements of spraying coatings, set the parameters of the spraying equipment, including spraying pressure, spraying speed, spraying angle and so on.

　　Debugging equipment: Before starting the formal spraying operation, debug and test the equipment to ensure that the equipment operates normally and the spraying meets the requirements.

　　Start spraying: According to the designed spraying path and program, move the 5-axis reciprocator to the correct position and start the spraying operation. By controlling the movement of the equipment and the machine, it realizes uniform and precise spraying of materials or products.

　　Inspection and acceptance: After the coating is completed, the coating is inspected and accepted to ensure that the coating quality meets the requirements. If necessary, it can be sprayed or repaired.